必需：标注图纸
Custom inquiry 定制询盘
Custom Shade Sail
遮阳帆定制加工页
Customization begins with a reviewable buyer brief. Requested shapes, dimensions, colors, finishing, accessories and packing are evaluated before they become part of an offer.
定制从可审核的买家需求开始。形状、尺寸、颜色、加工、配件和包装要求需经过评估后，才能写入实际报价。
流程：先评估可行性
确认：书面报价
01
Write the customization objective
写明定制目标
Explain the intended setting, the reason a standard direction is not enough and which requirements are essential. Separate required fields from preferences so the factory can identify what must be met and what may be adjusted.
请说明使用场景、现有方向为何不能满足需求，以及哪些要求必须实现。将必需项与偏好项分开，便于工厂判断不可变要求与可调整内容。
- Label required and preferred fields标明必需项与偏好项
- Explain the intended use说明实际用途
02
Provide geometry that can be reviewed
提供可审核的几何信息
Send the intended shape, a marked sketch and point-to-point dimensions. Include units and identify each connection point. A total area or an unmarked photo does not provide enough information for a custom size review.
请提交目标形状、标注草图和点到点尺寸，注明计量单位并标出每个连接点。仅提供总面积或未标注照片，无法支持定制尺寸评估。
- Use a marked sketch使用标注草图
- Identify connection points标明连接点
03
Describe color and finishing requests
说明颜色与加工要求
Use Catalog 2.0 black, beige, dark green and silver gray illustrations, or older warm-beige product references, to indicate a color direction. These images do not confirm stock; send or approve a physical color sample. Describe requested edge and connection details without assuming that an illustrated treatment is automatically included.
可用电子册2.0的黑色、米黄色、墨绿、银灰示意或旧暖米色产品图说明配色方向。示意不代表现货，请另发或确认实物色样。请明确包边和连接细节，不要默认图片中展示的处理方式会自动包含。
- Attach a color reference附上颜色参考
- Annotate finishing details标注加工细节
04
Define hardware and accessory scope
定义五金与配件范围
List every requested ring, fitting, connector or other accessory as an individual item. Ask the quotation to distinguish supplied items from buyer-sourced or installation-site items.
请将每个连接环、五金、连接件或其他配件单独列项，并要求报价单区分随货项目、买家自备项目和安装现场项目。
- Use a separate accessory list建立独立配件清单
- Confirm included quantities确认包含数量
05
Set packing and labeling requirements
确定包装与标签要求
Describe unit packing, inner and outer packing, labels, barcodes and carton marks where needed. State which requirements are mandatory for the buyer's sales channel. Availability and cost are confirmed in the quotation.
请按需要说明单件包装、内外包装、标签、条码和外箱唛头，并指出哪些要求是买家销售渠道的必需项。可行性与费用以报价确认为准。
- Show a label reference if available如有请提供标签参考
- State packing quantities说明包装数量
06
Approve the feasible version
确认可行版本
A request becomes an order specification only after the factory has reviewed feasibility and the buyer has accepted the written version. Check dimensions, color, finishing, accessories, packing, quantity and destination before approval.
定制要求须经工厂评估可行性并由买家接受书面版本后，才能成为订单规格。确认前请核对尺寸、颜色、加工、配件、包装、数量和目的地。
- Do not order from an early draft不要依据早期草稿下单
- Approve one final written version确认唯一最终书面版本
Product FAQ 产品问答
Keep shown details separate from included scope.
区分图片展示内容与实际包含范围。
These answers state only the shape, color and pictured-accessory facts allowed by the supplied materials. The quotation controls the actual order.
以下回答仅说明现有资料允许确认的形状、颜色和图片配件事实；实际订单以书面报价为准。
01Can triangular, rectangular and square shade sails be customized?三角形、矩形和方形遮阳帆可以定制吗？+
The factory can review custom requests for triangular, rectangular and square shade sails. Send a marked drawing with point-to-point dimensions; feasibility and the offered shape and size must be confirmed in the written quotation.
工厂可评估三角形、矩形和方形遮阳帆的定制需求。请提供标有点到点尺寸的图纸；可行性以及实际供货形状和尺寸必须在书面报价中确认。
02Which shade sail colors are shown in the supplied materials?现有资料展示哪些遮阳帆颜色？+
Catalog 2.0 illustrates black, beige, dark green and silver gray; older references also show warm beige. Supplementary illustrations are color references, not stock confirmation. Approve a physical color sample and confirm availability in the written quotation.
电子册2.0示意黑色、米黄色、墨绿和银灰，旧参考另有暖米色。补充示意仅供选色，不代表现货；需按实物色样和书面报价确认可供情况。
03Are D-rings and installation hardware included?是否包含 D 形环和安装五金？+
D-rings and other hardware are visible in supplied images only. An image does not establish that they are included; list every required item and have the supply scope confirmed in the written quotation.
D 形环及其他五金仅在现有图片中可见。图片不能证明这些项目随货；请逐项列明需求，并在书面报价中确认供货范围。
Factory inquiry 工厂询盘
Send a brief that can be checked.
发送一份可核对的需求。
Include application, shape, point-to-point dimensions, preferred color, attachment scope, quantity, packing and destination.
请包含用途、形状、点到点尺寸、意向颜色、固定范围、数量、包装和目的地。